Kitchen stools. Whether its a modern breakfast bar you have or a traditional pine table, kitchen stools can be ideal for your seating requirements. Traditional chairs or bar stools like those pictured below can give that warm feeling that you had whenever you where in your mama's kitchen. Alternatively a metal, chrome or aluminum look can add sleek and sophistication to any modern kitchen. As with the pub stools the height of the counter should be considered prior to purchasing any stools or chairs. The standard breakfast bar is usually 36” which would suggest that you use a 30” stool. When considering a breakfast bar the rule-of-thumb is to have a 6-10” gap between the counter and the seat to derive maximum comfort. However, if you have traditional seating arrangements around a table leave a 6” gap.
The Construction. To get the bar stools of the right construction, you should carefully consider these points: Who is going to sit on the stools? How frequently will the stools be used? For how long periods of time will the stools be used? If the stools will be just used occasionally and for short periods of time you will be fine with stools of any construction, be it wooden, metal or plastic. However, if the stools will be used for long periods of time, often and by people of different weights, you should go for a high quality stools preferably metal ones with all-welded constructions. It will ensure safety and durability. High quality wooden stools may also work well but will require much more care. All-welded metal stools do not require bolts whilst wooden ones do. Assembly of some wooden stools require as many as 50 bolts. It means that regular checks must be made on them to ensure the safety of people using them because the bolts tend to loosen over time. It isn't the issue with the welded frames. So to be able to buy the ideal bar stools for your needs you should carefully consider the 3 factors described above; the style, the height and the construction of the stools. The style to ideally match the stools with your current decor, the height to ensure the best comfort for legs and the construction for utmost safety and durability.
outdoor restaurant bar stoolspatio bar stools clearanceoutdoor bar set with stoolsorganizationoutdoor counter stools modernindustrial outdoor bar stoolsfurnitureoutdoor wicker counter stools24 outdoor bar stoolscontemporary outdoor bar stoolsbar stool patio chairsused outdoor bar stoolscabinet32 inch outdoor bar stoolsoutside bar stoolsoutdoor bar stools for salewicker bar stools backlessbar stools for outside patio
What all these stools have in common is that they are made of wood. Back in the times of wild west, metal was not as prevalent as it is today, and the cowboys had to make do with the materials that were more readily accessible, in particular wood. So the cowboys had to master the art of woodworking to create these stools. The other materials the cowboys had available were natural leathers, either coming from caught wild animals, but more commonly from the cows that were slaughtered for their meat. Another thing these western saddle bar or counter stools have in common is that, just like the horse saddles, they never feature a back rest, or the arm rests.
Alternatively, you may prefer to buy stools with detachable bar stool that tie-on to the seatbacks. This gives you the advantage of being able to change the covers for cleaning or if you fancy a change of look, and can be useful if your stools get lots of use. When deciding which bar stools to buy, remember to take accurate measurements of the space available, to ensure a comfortable fit. Bar stools should be just the right height, so they are comfortable to sit in, with adequate legroom, but close enough to the counter top for convenience. As a rough guide, aim for a gap of around 9 or 10 inches between the seat and the counter. Think about the positioning of your bar stools and leave enough space between each one for people to be able to move freely. Commercial style swivel bar stools can work well in home settings too, and are great for saving space.
A restaurant owner avoids crowding their dinning room, the same logic holds true for the bar area. Too much furniture crowded together can cause an uncomfortable experience for the customer. The industry standard for seating placement is 26 to 30 inches distance as measured from the center of each stool. This provides enough room for dinners to eat and socialize without feeling crowded. Using this method, a business owner can measure their allotted bar space and then determine how many bar stools they will need.