Restaurant furniture can be a large investment, taking proper care of wood stools can significantly expand their life, be sure to read the manufacturer's care instructions. Clean spills immediately, this can be difficult in a busy bar environment but an upholstered bar stool can quickly become ruined if liquor or other items stain the seat area. The faster the spill is cleaned up, the less time the spill has to soak into the fabric. Try and avoid positioning bar stools too close to walls as they will rub on the wall and damage both the wall and the stool. Try and encourage customers to not lean back on two legs, not only can this lead to an injury claim if the customer falls, it also puts a large strain on the back legs and the back of the seat which can cause either area to fracture under the tension. Wooden stools shouldn't be placed in a setting where they are exposed to extreme dry or humid conditions. Wooden bar stools will dispel or attract moisture depending on the environment conditions. As the wood furniture absorbs moisture from the air around it in a humid environment it will swell just as it will contract when exposed to an extremely dry environment. There is a natural cycle for all wood furniture but when taken to extremes it can cause the wood to crack, weaken, or split over time.
Kitchen stools. Whether its a modern breakfast bar you have or a traditional pine table, kitchen stools can be ideal for your seating requirements. Traditional chairs or bar stools like those pictured below can give that warm feeling that you had whenever you where in your mama's kitchen. Alternatively a metal, chrome or aluminum look can add sleek and sophistication to any modern kitchen. As with the pub stools the height of the counter should be considered prior to purchasing any stools or chairs. The standard breakfast bar is usually 36” which would suggest that you use a 30” stool. When considering a breakfast bar the rule-of-thumb is to have a 6-10” gap between the counter and the seat to derive maximum comfort. However, if you have traditional seating arrangements around a table leave a 6” gap.
vintage bar stoolsblue counter stoolgray bar stoolsstairkitchen stoolswestern bar stoolssmallunique bar stoolschrome bar stoolsmetal counter height stoolswood swivel bar stoolscounter height swivel bar stoolsadjustable height bar stoolsaccentlow back counter stoolsbar stools for saleyellow bar stoolsrooms to go bar stools
The last feature that you may want your bar stools to have is a back rest. Back support is ideal for homes with children to ensure they have proper support and do not accidentally fall off when seated. A stool with a back rest may also feel more comfortable and natural for most as the majority of people are already accustomed to sitting in chairs with back support. Contrarily, backless bar stools are more traditional in appearance and the staple for typical bar seating that you might find at a restaurant or a pub. They also encourage correct posture by forcing you to sit up right while aligning your spine. The option for a back ultimately comes down to comfort and what you are most familiar with.
Small stools. As well as the standard 36” bar stool, which is the average height for an average bar counter, all bars from local taverns to up-market cocktail lounges have additional seating areas. Obviously, the standard size of bar stool would be inappropriate for such a bar table or lounge area. Therefore proprietors should always have a stock of smaller stools for the lounge and seated area in the public bar. Usually, in most cases, only a 20” stool would be required to meet the comfortable table height. A good rule-rule-thumb for a table stool would be to give approximately 6” between the seat and table surface.
Round saddle bar stool. Some western style counter stools have a round ”saddle” instead of rectangular. They are still termed western counter stools for their other qualities, such as wood as the material for both their legs and the seat. They will typically have four legs, and the neighboring legs will be connected with cross bars at different heights on neighboring sides, and same heights on opposite sides, for stability and sturdiness of construction. Sometimes the legs will be made of natural branches, with their natural curvatures, giving a seat a rustic, unique look. Later, with the development of wood carving machines, the legs would become straight and of the same shape, and would feature simple circular ornaments.