Round saddle bar stool. Some western style counter stools have a round ”saddle” instead of rectangular. They are still termed western counter stools for their other qualities, such as wood as the material for both their legs and the seat. They will typically have four legs, and the neighboring legs will be connected with cross bars at different heights on neighboring sides, and same heights on opposite sides, for stability and sturdiness of construction. Sometimes the legs will be made of natural branches, with their natural curvatures, giving a seat a rustic, unique look. Later, with the development of wood carving machines, the legs would become straight and of the same shape, and would feature simple circular ornaments.
Pub stools-Take note of the height of your bar counter. Although the above statement may seem like common sense I have, on many occasions, been in bars and pubs where the bar stool was the wrong size for the bar or table at which I sat. Many proprietors spend a lot of time and energy on the look and feel of the bar's environment but fail to look seriously at how comfortable the customers will be when seated. For instance if you have a bar counter that is 46” then the most appropriate stool would be 34”. A quick rule-of-thumb is to have a 9-13” gap between the seat and the counter. This will give a very comfortable experience to the customer and have the average person in an ideal position at the bar. For a traditional pub or tavern with a 46” bar counter I would recommend a high-back wood style 34” stool with a foot rest. This would provide maximum comfort with that added authentic look and feel.
costco bar stoolsyellow bar stoolstable and bar stoolsstools for salecookwaregold stoolstandscounter height stools with backsadjustable height bar stoolsswivel counter stoolsikea counter stoolschrome bar stoolsoutdoor bar stools clearancecool bar stoolscontemporary bar stoolssparrowwest elm bar stoolscounter stools with backs
The Construction. To get the bar stools of the right construction, you should carefully consider these points: Who is going to sit on the stools? How frequently will the stools be used? For how long periods of time will the stools be used? If the stools will be just used occasionally and for short periods of time you will be fine with stools of any construction, be it wooden, metal or plastic. However, if the stools will be used for long periods of time, often and by people of different weights, you should go for a high quality stools preferably metal ones with all-welded constructions. It will ensure safety and durability. High quality wooden stools may also work well but will require much more care. All-welded metal stools do not require bolts whilst wooden ones do. Assembly of some wooden stools require as many as 50 bolts. It means that regular checks must be made on them to ensure the safety of people using them because the bolts tend to loosen over time. It isn't the issue with the welded frames. So to be able to buy the ideal bar stools for your needs you should carefully consider the 3 factors described above; the style, the height and the construction of the stools. The style to ideally match the stools with your current decor, the height to ensure the best comfort for legs and the construction for utmost safety and durability.
Restaurant furniture can be a large investment, taking proper care of wood stools can significantly expand their life, be sure to read the manufacturer's care instructions. Clean spills immediately, this can be difficult in a busy bar environment but an upholstered bar stool can quickly become ruined if liquor or other items stain the seat area. The faster the spill is cleaned up, the less time the spill has to soak into the fabric. Try and avoid positioning bar stools too close to walls as they will rub on the wall and damage both the wall and the stool. Try and encourage customers to not lean back on two legs, not only can this lead to an injury claim if the customer falls, it also puts a large strain on the back legs and the back of the seat which can cause either area to fracture under the tension. Wooden stools shouldn't be placed in a setting where they are exposed to extreme dry or humid conditions. Wooden bar stools will dispel or attract moisture depending on the environment conditions. As the wood furniture absorbs moisture from the air around it in a humid environment it will swell just as it will contract when exposed to an extremely dry environment. There is a natural cycle for all wood furniture but when taken to extremes it can cause the wood to crack, weaken, or split over time.
Once restricted to the local public house in the United Kingdom and Ireland and to the imitators in North America, 30 ” and 24” bar stools are now common place household furniture. Not only have these stools entered into the residential furniture market but they have broken out of a centuries old mold. For centuries bar stools seemed to be of uniform size and material. Times have changed. For literally centuries, stools found in bars were 30 inches in height. Of course, the height was specifically engineered so that a person could comfortably belly up to the bar and consume much ale. The stools were generally constructed from oak or another hardwood. The stools were firmly balanced upon 4 legs that were each attached to the underside of the stool seat a few inches towards the centre from each corner. As you can imagine, having a sturdy base of support was an important element in early bar furniture.